Virtual Filesystem

Cryptomator provides a virtual drive. Add, edit, remove files as you're used to with just any disk drive.

Files are transparently en- and decrypted. There are no unencrypted copies on your hard disk drive. With every access on your files inside the virtual drive, Cryptomator will en- and decrypt these files on-the-fly.

Currently WebDAV is our frontend of choice, as it is supported on every major operating system. WebDAV is an HTTP-based protocol and Cryptomator acts as a WebDAV server accepting so-called loopback connections on your local machine only. Whenever your file manager accesses files through this protocol, Cryptomator will process this request via the following layers.

Masterkey Derivation

Each vault has its own 256 bit encryption as well as MAC masterkey used for encryption of file specific keys and file authentication, respectively.

These keys are random sequences generated by a CSPRNG. We use SecureRandom with SHA1PRNG, seeded with 440 bits from SecureRandom.getInstanceStrong().

Both keys are encrypted using RFC 3394 key wrapping with a KEK derived from the user's password using scrypt.

encryptionMasterKey := createRandomBytes(32)
macMasterKey := createRandomBytes(32)
kek := scrypt(password, scryptSalt, scryptCostParam, scryptBlockSize)
wrappedEncryptionMasterKey := aesKeyWrap(encryptionMasterKey, kek)
wrappedMacMasterKey := aesKeyWrap(macMasterKey, kek)

KEK Derivation

The wrapped keys and the parameters needed to derive the KEK are then stored as integers or Base64 strings in a JSON file named masterkey.cryptomator, which is located in the root directory of the vault.

{
  "version": 5, /* vault version for checking software compatibility */
  "scryptSalt": "QGk...jY=",
  "scryptCostParam": 16384,
  "scryptBlockSize": 8,
  "primaryMasterKey": "QDi...Q==", /* wrappedEncryptionMasterKey */
  "hmacMasterKey": "L83...Q==", /* wrappedMacMasterKey */
  "versionMac": "3/U...9Q=" /* HMAC-256 of vault version to prevent undetected downgrade attacks */
}

When unlocking a vault the KEK is used to unwrap (i.e. decrypt) the stored masterkeys.

Masterkey Decryption

Filename Encryption

Before we deal with the actual file contents, file and foldernames get encrypted.

At first, each folder gets a unique identifier called directory ID. The directory ID for the root folder is special and always empty. For all other folders a UUID is created.

dirId := createUuid()

Cryptomator uses AES-SIV to encrypt file as well as directory names. The directory ID of the parent folder is passed as associated data. This prevents undetected movement of files between directories.

Filename Encryption

* Unique identifier is created for each directory


ciphertextName := base32(aesSiv(cleartextName, parentDirId, encryptionMasterKey, macMasterKey))

If it's a file, an encrypted file with this name is created in the corresponding directory.

If it's a directory name, we prepend a zero. We then create a file with this name, in which we write the directory ID. The files and folders inside this directory are stored in a different location:

dirIdHash := base32(sha1(aesSiv(dirId, null, encryptionMasterKey, macMasterKey)))
dirPath := vaultRoot + '/d/' + substr(dirIdHash, 0, 2) + '/' + substr(dirIdHash, 2, 30)

Thus, a nested directory structure, e.g.:

a
|- dataA.txt
\- b
 |- data-data.txt
 \- c
    |- dataB.txt
    \- d

Becomes a structure of sibling directories, e.g.:

d
|-L6
| \- V4YL7GBW4A4KKNSSJXVSUVRWH3ONI6
|    |- P6FBAFY7HJJLJYBY4IPZTWGMKKE2ONK3II======
|    \- 0CEOH7OJH3CY6PUFTOTULXALNNCCE5CEOA6IMBW4X
|-LN
| \- T3MOJAPX7MHPV7HMUYRWVI76PUGDQG
|    |- WPKQKC7NSNLMH7LCA3TGZVZXASK34C4JSF4ERZNO6AWFWF34A7SMO3XM
|    \- 034GWQ2GONIZZPACRD6P2VBWQOPWHA27DYE5KGRRB
|-Q2
| \- LWWOK3BVOVNIW5FUQIAWUT2A64ZEE6
\-YH
 \- UMPFQE22AFP66MQJUCZ4AOMMVZE522
    |- L76ZSEYYPGJJZM7YGANJO7JQVDGFQ7XXY6XDU4JH4MOZW4NWHFST4BQ=
    \- 0ZJAF3BSANWHI7Q5IM6UB6YCSXRD3MLRV2B76ZOY2

By making all directories effectively siblings (or cousins to be precise), we not only obfuscate the directory hierarchy but also limit path depth regardless of its actual hierarchy to ensure compatiblity with some cloud storage services.

File Header Encryption

The file header stores certain metadata, which is needed for file content encryption. It consists of 88 bytes.

  • 16 bytes nonce used during header payload encryption
  • 40 bytes AES-CTR encrypted payload consisting of:
    • 8 bytes filled with 1 for future use (formerly used for file size)
    • 32 bytes file content key
  • 32 bytes header MAC of the previous 56 bytes
headerNonce := createRandomBytes(16)
contentKey := createRandomBytes(32)
cleartextPayload := 0xFFFFFFFFFFFFFFFF . contentKey
ciphertextPayload := aesCtr(cleartextPayload, encryptionMasterKey, headerNonce)
mac := hmacSha256(headerNonce . ciphertextPayload, macMasterKey)

File Header Encryption

* Random per file change

File Content Encryption

This is where your actual file contents get encrypted.

The cleartext is broken down into multiple chunks, each up to 32 KiB + 48 bytes consisting of:

  • 16 bytes nonce
  • up to 32 KiB encrypted payload using AES-CTR with the file content key
  • 32 bytes MAC of
    • file header nonce (to bind this chunk to the file header)
    • chunk number as 8 byte big endian integer (to prevent undetected reordering)
    • nonce
    • encrypted payload

Afterwards the encrypted chunks are joined preserving the order of the cleartext chunks. The payload of the last chunk may be smaller than 32 KiB.

cleartextChunks[] := split(cleartext, 32KiB)
for (int i = 0; i < length(cleartextChunks); i++) {
  chunkNonce := createRandomBytes(16)
  ciphertextPayload := aesCtr(cleartextChunks[i], contentKey, chunkNonce)
  mac := hmacSha256(headerNonce . bigEndian(i) . chunkNonce . ciphertextPayload, macMasterKey)
  ciphertextChunks[i] := chunkNonce . ciphertextPayload . mac
}
ciphertextFileContent := join(ciphertextChunks[])

File Content Encryption

* Random per chunk change

Name Shortening

This layer doesn't modify any file contents. Its sole purpose is to limit the path length to ensure compatibility with certain Microsoft products, that do not support long paths.

Even with the flattened directory structure achieved during filename encryption, the file path might be longer than 255 characters. So whenever a filename reaches a certain threshold, it is replaced by its much shorter SHA-1 hash and gets a .lng file extension. Additionally an equally named metadata file is created in the m directory containing a reverse-mapping back to the original name.

This layer doesn't provide any additional security. Its sole purpose is to maximize compatibility.

Target Directory

After your files have been processed by all above layers, they are finally stored into your chosen directory.

This is where Cryptomator's job is done and the synchronization client of your favorite cloud provider will start synchronization.

This website uses cookies for statistical purposes. For more infos please see our privacy policy.